Skip to content
100% local

Gear ratio calculator

Turn tooth counts or diameters into gear ratios, output RPM and road speed.

Input
Output

Gear ratio calculator

Paste one gear pair per line — the driving and driven tooth count, or diameter, separated by a space, comma or colon — and this tool works out the ratio of every stage, the overall ratio through the whole gear train, and what that means for output RPM and road speed. It is built for anyone sizing a gearbox, a bicycle drivetrain, a 3D-printer belt reduction, or checking what a differential swap does to a car's top speed and cruising RPM.

Switch "Pairs are" between tooth counts and diameters — the ratio math is identical either way, since only the relationship between the two numbers matters. Add as many lines as your drivetrain has stages; each stage's ratio multiplies into the next to give the overall ratio, and a separate final drive ratio (a differential, or any last fixed reduction) is applied on top. Set the engine or input RPM to see the resulting output RPM directly.

To turn that RPM into a speed, give the tool a wheel circumference in millimeters, or paste a tire size like 205/55R16 and it derives the rolling circumference itself. Choose km/h or mph, and turn on the speed table to see the same calculation across a fixed 1,000–7,000 RPM range in one pass — handy for comparing gears at a glance instead of retyping the RPM field seven times. Every line is checked as it is typed, so a stray letter or a missing number is reported with the exact line it is on rather than silently ignored.

All of this runs locally in your browser — no gear ratios, tire sizes or RPM figures are ever sent anywhere. Copy the result, download it as a .txt file, or send the output back into the input to keep refining a build.

FAQ

How is the overall ratio calculated?
Each stage’s ratio (driven divided by driver) is multiplied by the next stage’s ratio, then by the final drive ratio, to give one overall reduction for the whole gear train.
Can I enter a tire size instead of a circumference?
Yes. A code like 205/55R16 is converted to a rolling circumference automatically; you can also type a circumference in millimeters directly.
What if my drivetrain doesn't have a separate final drive?
Leave the final drive ratio at 1 — it then has no effect and the overall ratio equals the product of the stages alone.
Does it work with wheel or sprocket diameters instead of tooth counts?
Yes. Switch "Pairs are" to Diameters — the calculation is the same, since only the ratio between the two values in each pair matters.
Is my data uploaded anywhere?
No. Every calculation runs entirely in your browser, and nothing you type is sent to a server.